tag class
A physical object that supplies and mixes air to a liquid or solids.
An air balancing unit on a nodding donkey.
An artefact intended for central conditioning and pressure increase of ventilation air.
A physical object that is capable of emitting positive charge carriers to and/or receiving negative charge carriers from the medium of lower conductivity.
A physical object intended to prevent something to pass.
A support that is a large and straight piece of normally timber or iron forming one of the main structural member of a building or supporting structure.
An equipment item that can be clamped to a beam to provide an attachment.
A physical object intended to support and locate a moving or static element and capable of reducing friction and transfer forces in a connection.
A physical object that is a hollow body with a flared mouth made of cast metal. Formed to emit a clear musical sound by the sonorous vibration of its entire circumference when struck by a clapper, hammer or other appliance.
An artefact which is a stack or an assembly of heavy-duty valves intended to be attached to the top of the casing to control the well pressure.
A physical object intended to compress and supply air or gas at medium pressure and medium volume flow.
A physical object intended to arrest or prevent the motion of an item. Typically by means of friction.
A physical object that is a reel on to which cable is wound during manufacture, for storage, transportation and installation.
A physical object that is a hood or covering for the top or end of something.
A physical object that uses centrifugal force to separate phases of different densities.
A mechanical device made for keeping objects firmly in place or position, temporary or permanently.
Any mechanical or electrical device that transmits or modifies energy to perform or assist a cleaning operation in the performance of human tasks.
A transmission that is intended to transmit energy between two shafts providing the capability to connect and disconnect the shafts.
A device compensating for axial or radial movement between two elements that is connected.
A pipe coil in which heat is transferred from the material or space cooled to the primary refrigerant.
Connecting with a coupling or coupler.
A mill that uses pressure or impact to reduce the particle size of solid materials.
A device that removes air or gases (methane, H2S, CO2 and others) from drilling liquids.
A physical object intended to catch fluid droplets.
A seal between two substance created of a impenetrable membrane.
A physical object that contains a diverging channel-shaped chamber in which part of the kinetic energy of the fluid is converted into pressure energy.
A physical object that is an opening in a barrier and a removable physical object that can block the opening.
A drier is a physical object that is intended to remove absorbed or adsorbed liquid or water vapour below saturation state.
A separator intended to separate material from a solution or suspension by electrostatic charge.
A heat exchanger that is intended to evaporate moisture or solvents in order to obtain a concentrate.
A piping assembly intended to transport exhaust gas or steam.
A pressure decrease device where the lower pressure is obtained by causing something to occupy or contain a larger space, or by acquiring greater volume.
Flexible joint between two pipes to receive expansion from the pipes.
A physical object that is intended to form material by forcing it in liquid phase through a shaping die by applying pressure and fix the form in the solid phase.
A physical object that is intended to deliver or exhaust volumes of vapour or gas at low differential pressure.
A closed transport device that is a gathering line tied into a trunk line.
A separator intended to remove solids from vapour or liquid.
A filter element intended to collect particles from a stream in a filter or strainer.
A door capable of withstanding fire for a certain period of time and preventing fire from diverging.
A physical object that is an open structure of beams or bars.
A physical object that is intended to induce a reaction in a process fluid by heating it.
A plug capable of being melted and fused.
A distributor intended to distribute or redistribute a vapour.
A seal that is one or more closed loops of deformable material used between mating surfaces which have only very limited movement relative to each other.
A physical object that is a casing with an arrangement of two or more gear-wheels transmitting rotating motion from the input shaft to the output shaft.
A system that injects grease for lubrication or sealing.
A trough that is located along the eaves to catch and carry liquid.
A hatch door used to provide and secure access into a void, vessel or riser. To enable maintenance or inspection.
A fluid heater that is a coiled tube where heat is transferred from an internal heating medium to a surrounding substance.
An enclosure intended to protect equipment from weather influences or to protect surroundings of equipment from equipment noise.
A tubular which is flexible and capable of conveying liquids under pressure.
A connector intended for hose connection.
A reel capable of holding a hose.
An enclosure that also provides support.
A large sheet-metal duct or casing through which air is passed for forced-draught, ventilation or air-conditioning purposes.
An artefact for releasably connecting hydraulic fluid lines, having means for closing the fluid path when the connector is released.
An arrangement to supply hydraulic power according to specified levels and tolerances.
A unit minimum consisting of a engine driven hydraulic pump and a reservoir which is delivering hydraulic energy to one or more consumers
A physical object that isolates.
A physical object intended to provide access to a certain part or level of equipment, and that consists of rungs between two profiles.
A retrievable and configurable device to route and re-route flow true the cap.
A system that provides lubricant to rotating or moving items.
An access point that is of sufficient size to allow a person to safely enter a vessel, space, chamber or drain.
Is a support (item).
An artefact which is a pipeline fitting used to create a rigid pressure containing joint in a pipeline or flowline.
A physical object intended to be used for fluid mixing processes typically a rotating piece of equipment comprised of a driver such as a motor which rotates an agitator immersed in the fluid(s) that need to be mixed.
A gas flow damper that is able to stay in any position between fully open and fully closed.
Is a bracket intended to attach an item to another item.
An artefact which is a collection of artefacts to be managed as one for some purpose.
A facility used to fasten lifting or movement equipment to the structure. A padeye have hole for a shackle.
A bellows that is a flexible corrugated tubular element providing axial and radial flexibility and pressure containment.
A mechanical structure intended to receive a number of pieces of basically standardized modular equipment.
A recuperator is a special purpose counter-flow energy recovery heat exchanger positioned within the supply and exhaust air streams of an air handling system, or in the exhaust gases of an industrial process, in order to recover the waste heat.
A physical object intended to mechanically remove a deposit from a surface.
A vibrating screen for sifting out rock cuttings from drilling mud.
A shear valve is a ram-type BOP, similar in operation to a gate valve, but uses a pair of opposing steel plungers, rams. The rams extend toward the centre of the wellbore to restrict flow or retract open in order to permit flow.
A wheel which is grooved for use with vee-belts, ropes, round belts, wire or pipe.
A physical object that is a layer or surface with a shape in two dimensions and length in the third dimension surrounding a space. Typically the cylindrical part of a vessel.
A hinged or sliding barrier used to control access to a high hazard area, made from robust materials used to protect personnel from exposure to hazards.
A physical object intended to reduce a noise level.
Device which separates oil from water by mechanically wipe the oil of the water surface.
A catcher intended to catch and separate liquid slugs from a fluid stream.
A beam that is used to spread ropes or slings when lifting.
Is a support structure intended to support a flare or vent pipe.
A trap that consists of a chamber into which condensed steam from steam pipes etc. is allowed to drain, and which automatically ejects it without permitting the escape of steam.
A filter that is separating solid particles from a fluid by passing the fluid through a wire mesh, screen or metal plates containing perforations or slits.
A distillation column intended to remove light components from a fluid.
A mechanical device capable of reducing the stroke length of a pump.
An artefact joining two parts so that one or both can pivot freely (as on a bolt or pin).
A fluid coupling intended to allow a smooth start of a driven equipment and then keeping a nearly constant speed.
A compactor is a machine or mechanism used to reduce the size of waste material.
Is a fresh water system.
A device for producing drinking water, but not necessarily by reverse osmosis.
Is a well services facility intended to handle wire lines.
An equipment class that contains classes that normally are the responsibility of a department for mechanical engineering that are not covered by the mechanical equipment class.