post weld heat treatment

Boolean

Property Information
Details and background about this property.
Description
Is a heat treatment after welding Intended to ensure that the atomic structure of a weld and heat-affected zone is restored to an optimum corrosion-resistant structure
Length
3
Unit of Measure
Picklist
Synonyms
  • CFIHOS ID
    CFIHOS-40000318
Equipment
Equipment that requires this property.
equipment class

A physical object for storing energy, and which after discharge may be recharged.

A cooler that is intended to use air as the cooling medium.

equipment class

A gravity separator where two liquid substances separates and where the substance with the less gravity can be skimmed off.

equipment class

A device that removes air or gases (methane, H2S, CO2 and others) from drilling liquids.

equipment class

A physical object intended to catch fluid droplets.

equipment class

A drier is a physical object that is intended to remove absorbed or adsorbed liquid or water vapour below saturation state.

equipment class

Is a fired heat transfer equipment intended to burn fuel and to transfer the heat of combustion to a liquid without vaporising the liquid.

equipment class

A tank or vessel in which a process stream is charged or pumped and where lighter products flash off or vaporize and are drawn off at the top. The remainder heavier fractions are drawn off at the bottom of the vessel.

equipment class

A static device generating centrifugal force from an incoming flow which separates solid or liquids from a gas of a different density.

equipment class

A separator that is based on the difference in specific gravity for the substances to be separated.

equipment class

A cyclone separator intended to separate a fluid by hydraulic forces.

equipment class

A reboiler often boils liquid coming from the bottom of a distillation column, after which the resulting vapour is returned to the distillation column.

equipment class

A drum intended to separate relatively small quantities of liquid from a vapour stream.

equipment class

A physical object that is a long tube or hollow body intended for conduction of liquid, gaseous or finely divided solid materials, or used for structural purposes.

equipment class

A fluid conductor that consists of pipe, possibly also including pumps, valves, and control devices, intended for conveying liquids, gases, or finely divided solids.

equipment class

A heat exchanger using plates as the device for separating the two fluids and across which the energy is transferred.

equipment class

A pressure vessel located in both pump- and compressor piping systems in order to reduce residual pulsation fluctuations, as a result of discontinue operation effects, within an allowable level specified.

equipment class

A physical object that is a vertical or near vertical pipe for the upward flow of liquid or gas.

equipment class

A distillation column intended to clean gas by washing the gas flow with water or with another liquid entering at the top of the vessel and sprayed in the gas. Typically to remove dust and small particles.

A tubular heat exchanger in which a tube bundle is surrounded by a shell.

equipment class

A catcher intended to catch and separate liquid slugs from a fluid stream.

equipment class

A physical object that is intended to mix fluid by means of diverging the flow with static obstacles or by increasing locally the velocity.

equipment class

A distillation column intended to remove light components from a fluid.

equipment class

A vessel intended to contain fluid for storage. Typically a receiving or collecting function for further distribution. Typically with a vertical and cylindrical or square shape and a flat or conical bottom.

Registers
Registers where this property is included.
An authoritative collection of values with a relationship to piping. The columns of this collection are specified and controlled.