Properties

Specify the required mounting locations for the accelerometers

Specify if accelerometers are required

Specify the porting into the area between the crown plugs for HXT

The high-voltage switchgear and controlgear accessibility type in accordance with IEC 62271-200

The actual length of the functional or physical object

Indicates whether the valve will be actuated for on-off or modulating service

A general description of the mechanical operation of the actuator For example is it linear or rotary? Electric or hydraulic?

The material of construction of the piston 'O' ring seal of an actuator

Specify if an additional, centrally located, flush port on the top of the mechanical seal gland plate is required

Specify the additional components to be subjected to positive material identification (PMI) testing

Specify the type of sub-surface examination required for the components to be subjected to additional surface/sub-surface examination

Specify the type of surface examination required for components to be subjected to additional surface/sub-surface examination

Specify if any additional surface/sub-surface examination is required

Specify the components to be subjected to additional surface/sub-surface examination

Specify if adjustable speed drive is required

Specify if adjustable speed drive (ASD) operation curve is required

Is a specification which describes the applicable materials for one or more items

The number of auxiliary contacts required for each air circuit breaker (NO-normally open, NC-normally closed)

Is a subtype of air cooler

Is a subtype of preheater

NPSHA that is available for a particular pumping system at alternate flow condition

The temperature at an alternate case at which a functional or physical object is expected to operate

A volume flow rate that is the alternate conditions volume flow rate at which a functional or physical object is expected to operate

The differential pressure at which a functional or physical object is designed for in alternate conditions

The rated differential pressure head at which a functional or physical object is expected to operate in alternate conditions