A cooler that is intended to use air as the cooling medium.

A container intended to store liquid or solid material partly or totally below grade and that is typically open.

An indirect contact heat exchanger that is intended to heat a liquid.

A support which is a cylindrical or slightly tapering body of considerably greater length than diameter, erected vertically as a support.

A cooler and an air cooled heat exchanger that is a tall structure through which air circulates by convection.

Is a pressure tank divided into two areas: the upper is a fluid storage area and the lower is a gas pressure area with the two areas separated by a diaphragm.

Is a heat exchanger where the exchange of heat takes place by direct mixing of hot and cold fluids.

A tubular heat exchanger that consists of two co-axial pipes of different sizes, where one fluid passes though the inner pipe and the other fluid passes through the space between the inner and the outer pipes.

A form of suction pump; a device using a high pressure jet of water to create partial vacuum at an intake opening to draw liquid from a sump.

A heater in which electric energy is converted into heat for useful purposes.

Flexible joint between two pipes to receive expansion from the pipes.

A separator intended to remove solids from vapour or liquid.

Is a fired heat transfer equipment intended to burn fuel and to transfer the heat of combustion to a liquid without vapourizing the liquid.

A system that burns waste in an elevated flame in the open air.

A tank or vessel in which a process stream is charged or pumped and where lighter products flash off or vaporize and are drawn off at the top. The remainder heavier fractions are drawn off at the bottom of the vessel.

A 3-phase separator vessel that utilizes heat and mechanical separation devices to facilitate the separation of oil-water emulsions

A vessel with a conical shape for filling or dosing purposes.

A tubular which is flexible and capable of conveying liquids under pressure.

A drum intended to separate relatively small quantities of liquid from a vapour stream.

A physical object that is designed to load or unload products into or from vehicles, wagons or vessels at variable positions.

A facility on a pipeline for inserting and retrieving a scraper or pig.

A physical object that is a long tube or hollow body intended for conduction of liquid, gaseous or finely divided solid materials, or used for structural purposes.

A fluid conductor that consists of pipe, possibly also including pumps, valves, and control devices, intended for conveying liquids, gases, or finely divided solids.

A non-corrugated plate heat exchanger that has flat core plates separated by u-shaped fins or corrugated plates.

A heat exchanger using plates as the device for separating the two fluids and across which the energy is transferred.