| breaking capacity | The current that a fuse or circuit breaker is able to interrupt without being destroyed or causing an electric arc with unacceptable duration | Number |
| current at lower limit continuous operating speed at maximum torque | The current at minimum continuous operating speed at the upper torque value of the load window as per IEC 61800-4 | Number |
| current at upper limit continuous operating speed at maximum torque | The current at maximum continuous operating speed at the upper torque value of the load window in accordance with IEC 61800-4 | Number |
| declared locked-rotor current at 100% rated voltage | The greatest steady-state root mean square current taken from the line with the motor held at rest, over all angular positions, at 100% rated voltage and frequency, as a per unit value of full load current (Is/In) including positive tolerance | Number |
| declared locked-rotor current at 80% rated voltage | The greatest steady-state root mean square current taken from the line with the motor held at rest, over all angular positions, at 80% rated voltage and frequency, as a per unit value of full load current (Is/In) including positive tolerance | Number |
| full load current | The motor full load current (FLC) while operating at rated voltage and rated frequency | Number |
| making capacity | The current that a circuit breaker is able to make without being destroyed or causing an electric arc under specified conditions | Number |
| nominal current | A current which is the current a functional or physical object has been designed to operate normally | Number |
| permissible short-circuit current under arcing conditions (Ip arc) | The permissible short-circuit current the equipment can withstand under arcing condition | Number |
| rated current | The rms or DC value of the current for which an apparatus has been designed | Number |
| rated current for electric SCSSV | The electric power requirements of each electric surface-controlled subsurface safety valves (SCSSV) in amps | Number |
| rated input current | The rms or DC value of the input current for which an apparatus has been designed | Number |
| rated output current | The rms or DC value of the output current for which an apparatus has | Number |
| rated peak phase to earth withstand current | The rated peak phase to earth withstand current the equipment can withstand | Number |
| rated peak withstand current | The rated peak withstand current for which the motor shall be rated | Number |
| rated primary current | The current on the primary side in a transformer | Number |
| rated secondary current | The current on the secondary side in a transformer | Number |
| rated short circuit current | The current that the functional or physical object can carry under short circuit fault conditions | Number |
| rated short-time phase to earth withstand current | The value of rated short-time phase to earth current the equipment can withstand | Number |
| rated short-time withstand current | The root mean square value of the current which the equipment can carry in the closed position during a specified short time | Number |
| specific starting requirement locked rotor current | The specific locked rotor current Expressed as per unit value of rated current (Is/In) | Number |
| starting current | An electric current that is a peak-current occurring when starting an electric energy transducer | Number |
