Properties

The required cool down 'no touch time'

Specify the pump cooling water plan required Refer to Annex B for piping plans

Is a specification which describes the cooling water

The type or quality of the required cooling water

A thickness that is the upper limit of allowed corrosion of a metal structure

Description of the cause of the expected corrosion

Specify if corrosion inhibitor present or not

The corrosion loop that includes the tag

Specify which corrosive agents are present in the process fluid

Specify if the gas is corrosive

Specify if the liquid contains corrosive agents

The atmospheric corrosivity category in accordance with ISO 12944

Geographic location of the project within a country which will determine the applicability of local regulatory requirements

The material from which the coupling and exposed shaft guard is constructed

Specify the required coupling component balance grade for the proposed pump

Is a specification which describes the coupling guard

The coupling hub fit for which the electric motor shaft shall be designed to accept

Specify if an insulated coupling is provided

Specify the coupling rating power/100 rpm for the proposed pump

A general description of the size of the coupling to the drive shaft of an equipment item

Is a specification which describes the coupling

A general description of the type of coupling to the drive shaft of an equipment item For example fixed, flexible, disconnected etc

Specify if the coupling hubs are required to be fitted hydraulically

Specify if the coupling hubs is required be fitted with a proprietary clamping device

Total greenhouse gas emissions arising from the extraction, processing, transportation and manufacture of materials and equipment up to the point where they leave the factory gate to be taken to site (A1-A3 in ISO 21930/EN 15804)