Properties

The maximum allowable duration of time for the motor to reach its rated speed at 80% rated voltage whilst starting from 'hot'

The maximum rotation about athwartship axis of the vessel under dynamic conditions defined in accordance with IEC 60092-101

The power that is the highest allowed for the rated impeller

The highest relative humidity at which a functional or physical object is designed for

The maximum rotation about fore-and-aft axis of the vessel under dynamic conditions defined in accordance with IEC 60092-101

The highest seal design temperature at which a functional or physical object is expected to operate normally

The temperature which is the highest ambient temperature at the site where the physical object is expected to operate

The highest sound pressure level at which a functional or physical object is designed

Specify the maximum motor A-weighted sound pressure level at a reference distance of 1 metre at no-load

The maximum sound pressure level at no load at maximum continuous speed at a reference distance of 1 metre

The maximum motor A-weighted sound pressure level at a reference distance of 1 metre at rated load

The maximum motor A-weighted sound pressure level at a reference distance of 1 metre within the load envelope including harmonic noise content

The upper specific heat limit that describes how much energy is needed to change the temperature of a material

The specific heat ratio which is the highest specific heat for the process medium

The highest static sealing pressure at which a functional or physical object is expected to operate normally

A vapour pressure which is the highest vapour pressure at which a functional or physical object is expected to operate

The required vibration grade as defined in IEC 60034-14

Is a subtype of UPS

Is a pressure below atmospheric pressure

Is an indication of the presence of a block valve

The line isolation requirement type between production wing valve (PWV and pressure control valve (PCV)

The line isolation requirement type between production wing valve (PWV) and pressure control valve (PCV)

The line isolation requirement type (pressure control valve (PCV))

The isolation requirement type if the line is used or 'line not present or port blanked' if the line is unused

The isolation requirement type if the line is used or 'line not present or blanked' if the line is unused