Properties

The temperature which is the highest temperature at which a functional or physical object is expected to operate

Is a thickness according to a design

Is a joint efficiency factor that is a correction factor for the strength of a weld dependent on the type and percentage examination Its value is 1 in case of 100% radiographic examination

Specify the site connection type requirement where shock pulse monitoring connection points are to be provided

The low voltage switchgear and controlgear short-circuit current in neutral conductor and in protective circuit in accordance with IEC 61439-1

Specify if shrink fit limited movement impellers are required

Specify if shutdown is required for an internal entry

Specify the type of technology used to transmit a signal For example electric, pneumatic, smart electric etc

The single core cable entry method

The high-voltage switchgear and controlgear site pollution severity class in accordance with IEC 62271-1 Annex K

Specify if snag load protection is required

Specify the source of adjustable speed drive

The assembly enclosure space heater control method

The assembly enclosure space heater monitoring method

Specify if a space heaters is required

A distance that is the length of a spacer

Specify if special coating for impellers and other wetted parts are required

Specifies if the functional or physical object involves mediums (eg 'steam', 'hydrogen', 'hydrofluoric acid', 'chlorine', 'oxygen', 'ethylene-oxide', 'sour', 'sodium hydroxide', 'potassium hydroxide', 'amine') that attract additional requirements with respect to component

Required weather protection like roof or winterization

The specific heat ratio for the process medium at inlet conditions

The rotational speed which is the specific rotational speed for the pump

The rotational speed which is the suction-specific rotational speed for the pump

The specific locked rotor current Expressed as per unit value of rated current (Is/In)

Is a specification which describes the applicable materials for one or more items

Is a specification which describes the applicable materials for one or more items