Properties

Specify the maximum allowable operating height

Is an allowable operating pressure that is the maximum pressure to which a container is allowed to be exposed during operating conditions when the item is new and cold

Is a back pressure that is maximally occurring

Specify the maximum depth of cover as measured from the ground surface to the top of the pipe

Is a burst pressure that is a upper tolerance burst pressure for a rupture disk

The maximum cooling inlet water pressure as per project specification and site conditions

The type of partial discharge sensing element to be provided

Is a temperature that is the highest at which a significant load can be applied

The measuring devices accuracy class

Specify the type of mechanical protection

Specifies the sensing object for which the sensor is designed

Specify if metering for chemical injection between PMV and PWV - Line #1 is required

Specify if metering for chemical injection between PWV and PCV - Line #2 is required

Specify if metering for chemical injection between PWV and PCV - Line #3 is required

Specify if metering for chemical injection outboard of PCV - Line #4 is required

Specify if metering for downhole chemical injection - Line #1 is required

Specify if metering for downhole chemical injection - Line #2 is required

Specify if metering for downhole chemical injection - Line #3 is required

Specify if metering for downhole chemical injection - Line #4 is required

Specify if a mimic one-line (synoptic) diagram is to be provided on the front of the PSC-assembly, displaying the single line arrangement of busbars and the main circuit switching devices

Specify the minimum depth of cover as measured from the ground surface to the top of the pipe

Is a burst pressure that is a lower tolerance pressure for a rupture disk

Is a temperature that is the lowest at which a significant load can be applied Typically applied to a pressure vessel Defined by the ASME Code, Section VIII, Division 1, paragraph UG-20 (see Section 3)

The minimum motor size for space heater ( ≥xkW)

The quantity of installed spare control and auxiliary terminals for future use to be provided