Properties

Specify the grade to the proposed pump first stage impeller centerline dimension

Specify the grade to pump process liquid minimum submergence level dimension

Specify the grade to top of proposed pump discharge connection dimension

Is a specification which describes the lubricant grease grade

Is a specification which describes the grease

Is a specification which describes the lubricant grease type

Specifies the level of H2S in the fluid

Determines if the PSV has a manual reset 'yes' or 'no'

Specify if hardened sleeves under line shaft bearings are required

Specify is hardness testing of parts, welds and heat-affected zones is required

The standard used to Specify hazardous areas

The material from which the head column is constructed

Is a thickness that is a bonus on a wall thickness to compensate for expected corrosion

Is a thickness that is a bonus on a wall thickness to compensate for expected corrosion

Is a thickness that is a bonus on a wall thickness to compensate for expected corrosion

Is a material of construction of which a lining is made

Is a possessed aspect being a role of the substance of an artefact when used to construct the artefact from Therefore the substance should be in a solid state at the conditions at which the artefact exists

Is a specification which describes the applicable materials for one or more items

Is a number of items where each item is a tube pass

Is a thickness according to a design

Is a joint efficiency factor that is a correction factor for the strength of a weld dependent on the type and percentage examination Its value is 1 in case of 100% radiographic examination

A thickness that is the upper limit of allowed corrosion of the inside of a header

Is a specification which describes the applicable materials for one or more items

Is the heater self-regulating or non-self regulating?

Tracing by supply of heat