A pressure transmitter that is producing a standardized output signal dependent of a received pressure difference signal.
A level transmitter which uses a displacer as sensing element.
A switchgear and controlgear that is an insulated panel carrying terminals, fuses, etc, for controlling a number of subsidiary electrical circuits.
A physical object that is an opening in a barrier and a removable physical object that can block the opening.
An actuator that produces a specified movement when excited by an electric signal.
A heater in which electric energy is converted into heat for useful purposes.
An electric machine for transforming electric energy into mechanical energy.
An internal combustion engine that is an induction compression ignition exhaust engine which ignites a fuel air mixture.
Flexible joint between two pipes to receive expansion from the pipes.
A physical object that is intended to form material by forcing it in liquid phase through a shaping die by applying pressure and fix the form in the solid phase.
A physical object that is intended to deliver or exhaust volumes of vapour or gas at low differential pressure.
A closed transport device that is a gathering line tied into a trunk line.
A physical object that is a projecting flat rim, plate, collar or rib.
is a process unit with gentle agitation used to bring together fine particulates in wastewater into larger clumps or flocs through physical contact to enhance the subsequent separation and removal of solids in sedimentation basins.
A hollow cone with a tube extending from the smaller end and that is designed to catch and direct a downward flow.
A turbine in which liquid forces are driving the rotor by the reaction of acceleration of subject liquid flow in the runner while the pressure drops.
A functional unit used to blind off a process stream.
A system that provides lubricant to rotating or moving items.
A physical object that contains a chamber with several openings.
A seal that comprises of a set of one or more rotating and stationary seal faces, together with auxiliary hardware, separated by a film of fluid intended to reduce flow loss around a rotating shaft to an acceptable level.
A physical object that has a protruding part through which a stream of fluid is directed.
Is a piping assembly of piping components to be pre-fabricated as one item.
A physical object that adds or removes mechanical energy to a fluid, either constantly or periodically.
A level transmitter that is producing a standardized electrical output signal based on the input signal from a radar type level sensor.
A positive displacement compressor in which forced reduction of gas volume takes place by the movement of a displacing element in a cylinder or enclosure.