operating manual

Document Type Information
Details and background about this document type.
Description
A document that describes methods of operating a piece of equipment or process unit, including but not limited to Instructions, procedures, drawings, tables, etc. for the operation -stop, start, and emergency shutdown. Including operational limits, function testing, possible interruptions, corrective actions, hazards and corrective measures to be taken.
Synonyms
  • CFIHOS ID
    CFIHOS-70000228
Equipment
Equipment that requires this document type.

A device decreasing noise in a HVAC system.

tag class

A trap that consists of a chamber into which condensed steam from steam pipes etc. is allowed to drain, and which automatically ejects it without permitting the escape of steam.

tag class

A filter that is separating solid particles from a fluid by passing the fluid through a wire mesh, screen or metal plates containing perforations or slits.

tag class

A vessel intended to contain fluid for storage. Typically a receiving or collecting function for further distribution. Typically with a vertical and cylindrical or square shape and a flat or conical bottom.

A detector intended to detect temperature.

A gauge that is intended to measure and indicate a temperature.

A functional switch that is intended to give an on or off signal when the temperature have reached a pre-set value.

A transmitter that is producing a standardized output signal dependent of a received input signal from a temperature element.

A pilot switch whose function is controlled by variations of temperature and whose contacts make or break automatically a load circuit when the temperature of the ambient space in which its sensing element placed or the temperature of the surface on which it is fixed reaches a predetermined value.

tag class

A tank which is supposed to be transported.

Trip & throttle valves provide flow control and emergency shut-off operation for steam turbines in a single valve assembly.

A tank (or a combination of tanks) and connected underground piping having at least 10 percent of their combined volume underground.

tag class

A pump that utilizes a liquid annulus held by centrifugal force around the inside of a casing by a single rotor-impeller to compress vapour isothermally.

A conveyor that is a tubular or flat trough with slides, to which vibrators are attached. The latter impart an upward and forward conveying movement to bulk materials in the trough.

A transmitter of which the output is proportional to a measured vibration.

A regulator designed to automatically maintain a constant voltage level.

A compactor is a machine or mechanism used to reduce the size of waste material.

Is a fresh water system.

A transmitter for weighing large quantities of material, and of which the output is proportional to the measured weight.

tag class

A turbine that converts the kinetic energy of the wind into electrical power.

Registers
Registers where this document type is included.
A collection of all instrument set points and/or alarms. Each instrument having an alarm or trip function is listed. Alarms and settings are given as percentages of transmitter range and in engineering units, together with transmitter range, location of the annunciation point, cabinet, identification and relevant P&IDs/PEFS or logic drawing.