Flexible joint between two pipes to receive expansion from the pipes.
A separator intended to remove solids from vapour or liquid.
A detector that is intended to sense a flame.
A physical object that is a projecting flat rim, plate, collar or rib.
is a process unit with gentle agitation used to bring together fine particulates in wastewater into larger clumps or flocs through physical contact to enhance the subsequent separation and removal of solids in sedimentation basins.
A detecting instrument intended to measure and indicate flow rate and/or produce a signal which represents the measured flow rate.
A seal that is one or more closed loops of deformable material used between mating surfaces which have only very limited movement relative to each other.
A physical object that is a closed, rigid box or casing used to enclose and protect the junctions of electric wires or cables.
A functional switch that is intended to give an on/off signal when particulate material or fluid level have reached a pre-set value.
A lifting device also serving as a cover or protection.
A lug with a hole for a lifting hook intended to lift the item or a part of it.
An artefact which contains fins or vanes intended to control a flow of air. Typically also to separate water droplets from an air stream.
A level gauge that use a float containing a magnet to transfer information about its position to a indicator rail with white and red flaps mounted on the outside of the tube.
A level transmitter that is producing a standardized electrical output signal based on the input signal from a nucleonic level detector.
Physical access control equipment and/or systems intended to regulate or control entry into and/or exit from a controlled area, protected area or a restricted area.
A physical object that is a long tube or hollow body intended for conduction of liquid, gaseous or finely divided solid materials, or used for structural purposes.
A physical object that has three piping ends in T-shape, including a branch at 90 degrees.
A physical object used in or in connection with a piping system.
A fluid sensor producing a differential pressure by means of two straigth tubes mounted in line with the direction of the fluid movement. One tube is open-ended and measures the stagnation pressure of the fluid. The other tube is closed in front but has openings along the tube to measure the static pressure of the fluid.
An electric cable intended for transmission of electric power.
A gauge intended to measure and display a representation of a measured pressure.
A regulator that is controlling/regulating the pressure in a system.
A physical object that adds or removes mechanical energy to a fluid, either constantly or periodically.
A level transmitter that is producing a standardized electrical output signal based on the input signal from a radar type level sensor.
A mechanical cable that is a large stout cord of strands of fibres twisted or braided together.