A flow transmitter providing an output signal that is proportional to the flow inputs from a differential pressure flow meter.
A gauge that is intended for measuring and indicating pressure differences.
A level transmitter that is measuring liquid level by sensing pressure difference between two points, e.g. the hydrostatic pressure at the bottom of a tank to the atmosphere pressure.
A pilot switch intended to switch or give an on/off signal when the measured differential pressure has reached a pre-set value.
A pressure transmitter that is producing a standardized output signal dependent of a received pressure difference signal.
A direct digital controller is an electronic device that uses a microprocessor for closed loop control of a process by reading inputs from sensors, computing the required outputs, and signaling the actuators accordingly without converting signals to analog.
A level transmitter which uses a displacer as sensing element.
An analyser intended to determine the relation between the boiling temperatures and the fraction distilled. It includes the initial boiling point and the final boiling point.
A physical channel that acts as a conduit for fluids, gases, pipes or cables to transfer from one point to another.
A 'detector' for measuring the velocity, mass, charge, flight direction, and number of dust particles in space.
A detector intended to detect a leakage current to earth.
A control valve that uses a rotating disc as closing element, and with a design that causes the disc to take a slightly eccentric path during actuation.
An actuator that produces a specified movement when excited by an electric signal.
An energy transducer that transforms non-electric energy into electric energy.
A heater in which electric energy is converted into heat for useful purposes.
An electric machine for transforming electric energy into mechanical energy.
An element located in a flowstream measuring the flow using electro-magnetic forces.
A flow transmitter that is specially designed to convert the signals from an electromagnetic flow meter into a standardized electrical output signal.
A physical object that comprises a printed circuit board with electronic components intended for receive, process/transform and transmit electrical signals.
A controller that uses in-built algorithms executed by electronic circuitry to perform its function.
An electronic ac converter for changing the frequency.
An electronic converter that changes direct electric current to single-phase or polyphase alternating currents.
A separator intended to separate material from a solution or suspension by electrostatic charge.
A valve that is assigned to act in case of emergency.